Project 5 Animation Sequences

For project 5 there is around 4 main 3D sequences that occur in video 2 and 3. These are highlighted in the storyboards.

These consist of showing the ctex machine and its flower pattern lights (the animation used for the concept/prototype)

Showing the fabric rolling left and right so that the customer knows to notify ctex about which direction the fabric rolls on their own machine.

Showing a PC on the left and right of the machine so the customer knows to notify ctex about which side the controller will be standing on.

And lastly the control box being closed to show dimensions needed to install. Or if they don’t have one to offer purchase of correctly sized control box.

Therefore I have created a timeline and lists to hopefully create all the assets in the allotted time.

Screen Shot 2017-04-21 at 11.29.41.png

As you can see so far I have created most of the initial assets needed for the animations however I still have to create the control box and also figure out a way to actual get the fabric to roll.

I have also created a basic setup where most of the animations will occur. Although this is very early stages and really just a jumping off point in terms of layout and structure.

Screen Shot 2017-04-21 at 11.31.59.png

I tried to use this tutorial to add movement to the fabric but unfortunately on my first attempt i couldn’t get the motion graphic elements moving. This was very irritating however I will attempt it again with a more thorough understanding of the concepts behind it and hopefully it will be second time lucky… Watch this space….

 

I have also made a start on the computer side to side animation as i have created all the necessary assets for this section. Again it is really basic with no real texturing or lighting etc. However it is a starting point for further development….

 

Advertisements

PROJECT 5 – The Final Brief

For project 5 I will be revisiting C-TEX and making a further 2 videos to complete the C-TEX Colour package. These will be available after the client has made the initial purchase of the machine and therefore will go into a lot more detail about pre installation of the machine and also training there workers to use the machine, and also showing the managers how to get the right information that they need from the spreadsheet that the program creates. Detailing different information about the materials being tested.

The first video is the sales video which was completed for Project 3.

The second video is a pre installation guide –

Pre-Install Video Script

Should be less than 5 minutes

Thanks for buying c-tex colour, this video guides you through 2 things:

1. The information we need from you in order to manufacture c-tex colour ready for you

2. For you to prepare ready for the installation

So…the information we need.

Firstly, we need a photo of where you would like c-tex colour to be installed. Here are some examples…

Then we need some dimensions so we can fit c-tex colour to your machine

Here we show you the dimensions we need

Secondly we need to know the direction the fabric is flowing in: please indicate this with an arrow

Thirdly we need to know at which side of the machine you wish the PC and Operator monitor to be located

Also please take a photo of your length measuring wheel (if you already have this installed) so we can assess how to fit our encoder onto this

Lastly, machine construction: Please indicate the materials your machine is made of and thicknesses. For example, Solid Mild Steel 6mm thick, Mild Steel Box Section 2mm thick with section of 100 or Wooden Section 15mm.

Therefore, the photo you send us will need the additional information as shown here (photo with all details on)

We can then build c-tex colour to fit your machine

Onto the second step:

For the installation we need:

Network Access to machine area for us to connect the c-tex colour PC to your network

Electrical power: single phase

If you have not purchased a control cabinet from us and you will be providing yourselves this needs to be onsite when we arrive. We require minimum internal dimensions of Height: 1000mm, Width 600mm, Depth 600mm. The operator monitor can be mounted above the control cabinet of you can purchase a control unit with monitor surround.

If you have not purchased a PC from us and you will be providing yourselves, please ensure this meets the specification we list in our agreement document and is available when we arrive onsite

If you are running c-tex colour for an inline process, for example a continuous dye range or sanforiser or compactor we will also need a mains compressed air supply provided, to include a regulator and moisture capture mechanism.

When we arrive onsite for the installation we need to meet with your factory engineering manager and IT manager to present what we are going to be doing while onsite and what support we need.

We will also need a meeting room with a projector or large monitor in order to give a training presentation for 1 hour. For the training we will need your colleagues who will be: operating c-tex colour, analysing the results of c-tex colour and managing the implementation of c-tex colour.

Adam has done these rough storyboards which really helped me to visualise what exactly needed to be done in terms of 3D animations. As this is the job role i will be fulfilling for this final project. I will of course have to make some more detailed sketches of what exactly needs to be shown in 3D and camera movements etc, however this quick visual is very handy for mapping out the whole video 2 sequence.

 

The third video is a training video – Full Script to follow…

 

The Importance of using a single shot / long take.

For my 1st video I have decided to use a single long take that lasts around 25 secs leaving 5 for the intro. This is really because it is a very linear way of showing the process happening and unfolding. It is very easy to follow along with through the 3 act structure as well.

However I will not be the first to use this process. 16 Incredible Long Takes.

If this process works for my 1st video I will definitely look into repeating this for the 2nd and 3rd video also as it is a really effective way of showing continuation and process within a short video. The linear flow should help replicate and envisage a guide alongside the actual process as it happens everyday.

 

And also a bit of inspiration just to keep me sane….

Met Office Weather Videos – Development

Initially I am thinking of creating a jelly-like see-through cube to symbolise the air as this is a key part of the process. However testing will be a huge part of this process also. The idea is to have the cold and hot air collide and wobble.

First Attempt:

This was an attempt to show the two different bodies of air and how they interact with each other. However on showing this in a tutorial i realised that a lot more effort needs to be made into camera movement and also justifying the correct ways that the air interacts as this is a lot more comical and abstract than what it would naturally be. The feedback helped explain that too me as there was much confusion when i showed this to the group. It was also apparent that as well as the camera movement the framing was also way to close up and things just ended up looking squashed into frame. This is a prototype however and at this stage I am just initially coming into the testing phase to see what works and what doesn’t so this feedback is really priceless.

Second attempt:

This was round 2 of prototyping and i paid a lot more attention to particles within the body of air and also how they interact with each other. However the physics system inside C4D made it difficult to really pack them in and creating a seamless border. I also have become aware of how linear it isn’t. By this I mean the 3 act structure remains unclear as there are different shots and angles and the condensation phase is conceptually completely different to scene 1 with the separate hot and cold air. I also had time to experiment with textures and quickly realised that I still wanted to go for a low poly style and therefore the textures kind of didn’t match up with the overall style. Also this type of weather would not be happening at ground level so the whole idea of generating grass became redundant.

Phase 3 –

Initially i found this flock modifier video on youtube and thought it would be a great way to show wind and air without having to encapsulate it in a capsule. A way of controlling a more free flowing environment and have two opposing forces. However upon further inspection (much to my dismay) it only runs on C4D R18 ( a couple of versions newer than what i have installed on my computer) therefore this was irritating but nonetheless i could not use it. However this would not stop me in really understanding and creating more “windy” animations using several different effectors. Downloading a simple plugin would have been a lot easier but i guess this was just another challenge for me to face head on.

The cluster effect i thought would be very useful to show particles however i found that they in fact did not have enough room to show the two elements of hot and cold coming together and mixing. Therefore i sort of combined these two tutorials to give a much nicer open element look and structure to the piece.Screen Shot 2017-03-14 at 17.58.41.png

I have also managed to integrate a much smoother camera operations that really helps build on the 3 step process. By having one single shot through a constant rising camera it also helps to show proportion and where these chemical interactions are actually happening in comparisons to city level.

I have also managed to seamlessly integrate the clouds further up the timeline so that I can speed up rendering and also keep the same shot throughout the whole film. Problem solving has definitely gone a long way within this project as i have done nothing but repeat processes from different angles and approaches until i find the one that fits. However I have a feeling that this 3rd render will definitely be a lot more structured and factually accurate than the last two and i could be onto a winner.

Third Attempt:

Story boarding and Decision Making

 

So after creating a simple and very rough draft of a storyboard:Met Storyboard.jpg

And speaking to several people about the two different concepts and how they would work as a group or package of work I have decided to stick with the 3 different types of rain. However I still need to figure out the exact 3 act structure for this by looking at adverts and short films to see how they are made and the journey they take. This will hopefully help to inform my own route to creating a solid structure that they all follow.

In this the three act structure is really apparent even in a very quick 30 second clip.

  1. Introduce the main characters Tom and Jerry
  2. A classic tom and Jerry chase scene (The Problem)
  3. Jerry finds safety in a ford mondeo (The solution)

Showing us the viewer how safe and secure a Ford Mondeo is.

  1. A Cat with a dull life
  2. Starts acting like a dog
  3. Because of O2?

I think the point of this is really to urge people to take more risk and spice up your life by changing your phone plan. An odd concept but there is a clear structure and message behind it.

Again a simple structure of introduction, problem and solution

  1. Meerkat Introduces himself and who he is
  2. Shows people that compare the meerkat and the market are two different sites.
  3. Solves this by explaining the difference and therefore promoting the brand.

This is a great advert from the guardian which takes an old nursery tale and twists it on its head. Although a bit longer than thirty seconds and not structured as linearly as others it still shares a story through twisting a nursery tale with more adult themes.

  1. Re introduce a classic tale but through modern day life and with a twist
  2. Frame the goat saying he deserved it and they were just defending there homes.
  3. Introduce new information which says otherwise and ends up condemning the main characters.

A really interesting concept.

And finally one more with a classic 3 Act structure.

  1. Character introduction
  2. go flying and snowman asks for a sip but boy says no
  3. snowman drops boy and steals the irn bru

Its apparently too good too share!! very simple yet very effective in showing the brands desirability.